| Quantity: | |
|---|---|
JH-FC006
Glorylab
8414609090
Model: JH-FC006
Our fume hoods has been tested by SGS and got approval, it ensures the safety features of our products.
Main material:
304 stainless steel sheet, it has excellent performance on chemical resistance. It can be also used in clean room.
Window:
1.one whole piece of 5mm thick tempered safety glass sashes in PP frame, able to sliding laterally in the frameand vertically with the frame.
2. Frame balanced from elevation and sides so as it can be stopped at any position by pulling up or down.
3. Aluminum alloy handle along the glass edge which is chemical resistance.
Exterior Structure:
1.0/1.2 mm thick coldrolled steel folded, welded, polished, acid cleaned, phosphoresced, and coated with electrostatic, corrosion resistant. And oven dried spray paint.
Interior Claddings:
5 mm thick compact panels on the side with air flow guides on top to protect the wall and facilitate air discharge. Modular construction.
That can be easily disassembled for cleaning and reassembled. Acids, Alkalis,moisture and high temperature resistant.
Working table:
19mm epoxy resin workop with 25mm edge which is continuous on all four sides of the worktop.
Lighting:
30 Watt antisepsis daylight lamp fitted in gas insulated housing to provide not less than 400 LUX of light flux on the working table.
Socket:
Four sets of 220 volt/ 10 AMP multi-functional electric socket outlets with water proof cover.
Lab accessories:
1. Yellow brass, epoxy resin coated water control valve and cock.
2. Yellow brass, epoxy coated gas control valve and cock. The gas valve is with safety function to avoid air leakage, it will not be unintentionally turned on unless you press it.
Control panel:
LCD control panel which is capable of controlling ON/OFF of fume hood, lamp and fan. Shutdown time can be set in advance. We can furnish control panel imported from France which can show face velocity, make alarm etc.
Storage Cupboard:
1. 3 or 4 double walled doors made of 1.2 mm thick cold-rolled steel and spray painted as specified above.
2. Stainless steel handles and S.S hydraulic hinges.
3. PP United Cup, resistant to acids, alkali and organic impregnations.
Face velocity:
It's 0.4-0.6m/s when we open the sash at 24''. (when the sash is fully opened).
Size(mm) Air Volume(m3/h) Differential Pressure(Pa) Noise dB
1200x850x2350 1200~1800 40~85 ≤48
1500x850x2350 1500~2000 40~120 ≤48
1800x850x2350 1800~3000 60~150 ≤48
Remark:
1. We can add polypropylene storage cabinet in the under cabinet to store strong chemicals.
2. We can furnish duct and fan if it's required by customers.
3. We can furnish custom-built fume hood based on customer's requireme
Model: JH-FC006
Our fume hoods has been tested by SGS and got approval, it ensures the safety features of our products.
Main material:
304 stainless steel sheet, it has excellent performance on chemical resistance. It can be also used in clean room.
Window:
1.one whole piece of 5mm thick tempered safety glass sashes in PP frame, able to sliding laterally in the frameand vertically with the frame.
2. Frame balanced from elevation and sides so as it can be stopped at any position by pulling up or down.
3. Aluminum alloy handle along the glass edge which is chemical resistance.
Exterior Structure:
1.0/1.2 mm thick coldrolled steel folded, welded, polished, acid cleaned, phosphoresced, and coated with electrostatic, corrosion resistant. And oven dried spray paint.
Interior Claddings:
5 mm thick compact panels on the side with air flow guides on top to protect the wall and facilitate air discharge. Modular construction.
That can be easily disassembled for cleaning and reassembled. Acids, Alkalis,moisture and high temperature resistant.
Working table:
19mm epoxy resin workop with 25mm edge which is continuous on all four sides of the worktop.
Lighting:
30 Watt antisepsis daylight lamp fitted in gas insulated housing to provide not less than 400 LUX of light flux on the working table.
Socket:
Four sets of 220 volt/ 10 AMP multi-functional electric socket outlets with water proof cover.
Lab accessories:
1. Yellow brass, epoxy resin coated water control valve and cock.
2. Yellow brass, epoxy coated gas control valve and cock. The gas valve is with safety function to avoid air leakage, it will not be unintentionally turned on unless you press it.
Control panel:
LCD control panel which is capable of controlling ON/OFF of fume hood, lamp and fan. Shutdown time can be set in advance. We can furnish control panel imported from France which can show face velocity, make alarm etc.
Storage Cupboard:
1. 3 or 4 double walled doors made of 1.2 mm thick cold-rolled steel and spray painted as specified above.
2. Stainless steel handles and S.S hydraulic hinges.
3. PP United Cup, resistant to acids, alkali and organic impregnations.
Face velocity:
It's 0.4-0.6m/s when we open the sash at 24''. (when the sash is fully opened).
Size(mm) Air Volume(m3/h) Differential Pressure(Pa) Noise dB
1200x850x2350 1200~1800 40~85 ≤48
1500x850x2350 1500~2000 40~120 ≤48
1800x850x2350 1800~3000 60~150 ≤48
Remark:
1. We can add polypropylene storage cabinet in the under cabinet to store strong chemicals.
2. We can furnish duct and fan if it's required by customers.
3. We can furnish custom-built fume hood based on customer's requireme
