+86-15370203085 glorylabfurniture@gmail.com
| Quantity: | |
|---|---|
JH-WT039
Model: JH-WT039
This double outlet lab water tap is a professional water fixture specially designed for installation on laboratory sinks. It is widely applied for supplying water to lab analytical instruments, cleaning test tubes, beakers and other lab glassware, as well as supporting sample pretreatment and experimental pipeline connection.
This faucet adopts a dual independent valve design with two separate tapered barb outlets, allowing simultaneous water supply for two groups of experimental equipment. It is available in white and gray epoxy coating to match various lab cabinet styles, with a standard Φ22mm bench mounting hole for easy installation.
1. Valve Body: Hot-forged H59-1 brass bar, high structural rigidity and pressure resistance
2. Vertical Stand Pipe: Φ26×1.2mm thick H63 brass tube
3. Horizontal Curved Arm Pipe: Φ22×1.2mm H63 brass tube
4. Outlet Nozzle: Hot-forged H59-1 brass bar with tapered barb tip
All metal surfaces are treated with epoxy resin coating, delivering triple performance: corrosion resistance against lab chemicals, heat resistance up to 95°C, and anti-UV radiation to prevent fading and peeling.
1. Ceramic Cartridge Valve: 90° quarter-turn operation, tested for 500,000 open/close cycles with zero dripping leakage
2. Control Knobs: Ergonomic high-density PP plastic, comfortable to grip even with chemical protective gloves
1. Working Temperature Range: 1°C ~ 95°C
2. Recommended Operating Water Pressure: 1 bar – 8 bar
3. Maximum Pressure Resistance: 10 bar
4. Inlet Connection: Standard G1/2 thread
5. Mounting Hole Diameter: Φ22mm
6. Available Colors: White, Gray
Two separate water circuits with individual control knobs. You can freely open, close and adjust water flow of each spout without mutual interference, supporting parallel experimental operations to boost lab efficiency.
The bent dual arm features adjustable angle, providing ample vertical space for tall lab glassware, and fully covers the entire sink area for flexible operation on both sides of the lab bench.
Sharp tapered nozzle tips fit most standard lab rubber and silicone hoses, ideal for connecting distillation, extraction and analytical lab instruments.
Matched fittings fit Φ22mm standard bench holes perfectly. Thickened flange base ensures stable anti-shake installation, and G1/2 universal inlet thread fits most global lab water supply systems.
Full thick brass pipeline ensures outstanding pressure resistance, while epoxy coating protects the faucet from acid, alkali and chemical vapor erosion, achieving far longer service life than plastic lab taps.
Drawing：
Raw material: thickened coppper
Working Status of Lab Faucet:
